WD Licensed By Fender Replacement 22 Fret Neck For Telecaster Rosewood Fretboard Modern C

WD® Licensed By Fender Replacement 22 Fret Neck For Telecaster Rosewood Fretboard Modern C [SKU:TNMCR]

Replacement Telecaster® neck, 22 Polymet 4049-2087 Vintage Jumbo Frets with headstock adjust double action truss rod and a 12 inch radius maple fingerboard. The nut width is 1 11/16 inch wide and pegholes are drilled at 10mm for a modern die cast type tuning machine but adapter bushings are available to reduce these hole sizes if you would like to mount vintage Kluson tuning machines. A thin clear satin finish makes this the perfect replacement for your modern Telecaster. Nut is Included.

All necks require a final level, crown, and polish and may need to be fine-tuned to your instrument and playing preferences. Your new neck should be carefully inspected prior to installation and/or modification as necks are rendered non-returnable once altered. Due to the organic nature of wood each neck is considered unique and may have minor variations in grain or finish from those pictured. WD does not sell what is commonly referred to as seconds or blems. Due to the volume of necks that we sell WD does not hand-select necks based on appearance or weight. WD neck heels are made to Fender USA dimensions and tolerance, this may not account for neck pocket shrinkage or expansion over time. Some neck pocket modification may be required.

WD recommends that if you are not familiar with replacement neck installation that you contact a qualified luthier or repair shop.

Features:

• Fingerboard Radius = 12 in.
• Nut Width = 1 11/16 in. (Nut Included)
• Profile Shape = Modern C-Shape
• Fret type and count = Medium 6150 / 22 frets
• Tuner peghole size = 25/64 in.
• Binding = none
• Neck Finish = Super thin satin Poly
• Truss Rod location = headstock
• Truss Rod Type = Double Action
• Skunk Stripe = no
• Neck and Fretboard Type = two-piece Maple, ebony on maple, rosewood on maple or pau ferro on maple
• Heel Type = Standard Telecaster
• Orientation = Right-handed
• Fret Marker = Dot

Truss Rod Adjustment Tool (Not Included):

• Allen Head Necks = 4mm
• Straight Head Necks = Standard Straight Head Screwdriver